| 1. |
COMPUTER
INPUT TERMINAL
Connect the computer output to this terminal. |
| 2. |
COMPUTER
PORT CONNECTOR
When controlling the computer with the Remote Control of this
projector, connect the mouse port to this terminal. |
| 3. |
COMPUTER
AUDIO INPUT JACKS
Connect the audio output from the computer to this terminal. |
| 4. |
AUDIO
INPUT JACKS
Connect the audio outputs from video equipment to these
terminals. When the audio output is monaural, connect it to
the left jack. |
| 5. |
VIDEO
INPUT JACK
Connect the video output from the video equipment to this
terminal. |
| 6. |
S-VIDEO
INPUT JACK
Connect the S-Video output from the video equipment to this
terminal. |
| 7. |
RESET
BUTTON
The projector adopts micro computer to control the appliance.
The micro computer rarely works incorrectly and may not
control the projector properly. In this case, press RESET
button with a sharpened tool (like a pen) to shut down the
appliance. The projector must be switched off. Do not use the
RESET unreasonably. |
| 8. |
AUDIO
OUTPUT JACK
Connect the audio amplifier to this terminal. |
| 9. |
MCI
SERIAL TERMINAL
This terminal is use to connect a computer to edit (read and
write) the data of PC card with "Media Card Imager" |
| 10. |
MONITOR
OUTPUT TERMINAL
Connect to the monitor to this terminal |
