Da-Lite: Product Specifications

Cosmopolitan Electrol

Specification Data

Installation Manual

Specification CAD File (*.dxf)

When Ordering Make Appropriate Selections:

1. Select size:

Use our handy chart(s) on the CAD Drawing Page.

2. Select Viewing Surface

3. Options

Black “Extra Drop” to lower picture area more than normal. Maximum total drop 13' (396 cm) including picture area.
White “Extra Drop” to lower picture area more than normal. Maximum total drop 13' (396 cm) including picture area.
Floating Mounting Bracket which allows the screen to be mounted either on the wall or ceiling at most secure position. The screen can be moved left or right for proper centering on the wall or alignment to projector. Available in either black or white.
Single Motor Low Voltage Control, 3 Button with 1 Switch
Radio Frequency Wireless Remote Control for LVC System
Infrared Wireless Remote Control for LVC System
Locking Switch Coverplate for 120 V or 3 Button LVC Switch.
Key Operated Switch for 120 V only (note: cannot be used with low voltage system).
No borders (black masking borders standard).
220 Volt (50 Hz) Motor.
Video Projector Interface - 12 V or 5 V.
No. 6, 6# Non-adjustable Extension Brackets

4. Features

High quality electric screen
Easy to Install
Patented rubber mounting system for in-the-roller motor

5. Suggested Specifications

___________ projection screens, __________ (H) x__________ (W), electrically operated 120 volt (60 Hz), .95 amp. Shall have specially designed motor mounted inside the roller with a patented noise silencer to be three wire quick reversal type, oiled for life, with automatic thermal overload cut-out, integral gears, capacitor and an electric brake to prevent coasting. To have preset but adjustable limit switches to automatically stop picture surface in the “up” and “down” positions. The roller to be of rigid metal, 3" in diameter, mounted on two vibration and noise absorbing supports. Screen fabric to be flame retardant and mildew-resistant fiberglass with Glass Beaded, Matte White, Video Spectra^TM 1.5 or High Power picture surface with black masking borders standard. Bottom of fabric shall be formed into a pocket holding a 3/8" diameter metal rod. Vdeo Spectra^TM 1.5 material to be 7/8" diameter aluminum slat tube. Case to be 22 gauge steel, hexagon in shape, with flat back to prevent scraping fabric. Case end caps to be heavy duty, allowing no exposed roller pins. Powder coated caps shall form sturdy brackets for wall or ceiling installation. To be complete with three position control switch in box with cover plate. Screen to be listed by Underwriters' Laboratories.

Matte White: Will be seamless up to and including 10'.

Glass Beaded: Will be seamless up to and including 8'

Video Spectra^TM 1.5: Available in sizes where both height and width do not exceed 8'. All sizes will be seamless.

High Power: Available in sizes up to and including 9' x 12'. Will be seamless up to and including 6'.