MULTIPORT SMARTLINKS
Smartlink cables are the hardware interface
between SMARTPAX QC control units and audiovisual devices in
your rig. Each cable plugs into one of four ports on the back
of each SMARTPAX QC unit. The other end of the smartlink cable
connects to the device you want to control.
AUDIO SMARTLINKTM
article number 3493
The AUDIO SMARTLINK is an audio mixer,
letting you incorporate audio levels in your multimedia rig.
It has eight input/two outputs with two additional fixed
inputs allow multiple units to be cascaded for increased input
capacity. The gain can be set or faded independently for each
of the eight inputs to any value in the range -100 dB to +32dB
plus mute. Each of the eight inputs have an overload LED
indicator to avoid distortion.
For more information, download the AUDIO
SMARTLINK product sheet (556 kB).
RELAY SMARTLINK
article number 3494
The RELAY SMARTLINK is used to control relay
functions for audio equipment, LEDs and lamps, voltage
functions, such as AC/DC motors and power switching. This
general purpose interface has two independent single-pole
double-throw relays, each capable of switching up to 24 Volt
DC/AC and 2 Ampere. It also features built-in optional arc
suppression varistors for use with inductive loads.
For more information, download the RELAY
SMARTLINK product sheet (123 kB).
KEYLINK
article number 3498
TheKEYLINK is a versatile remote control
unit. It features eight illuminated keys and eight screw
connector terminals. External switches may be connected to
these terminals for sensing input such as a door opening, for
example. These terminals can also be used as low-level outputs
for activating external power relays.
Four KEYLINK units may be daisy-chained to a
single SMARTPAX QC port. KEYLINK functions are programmed from
Dataton TRAX, version 3.6.1 or later.
For more information, download the KEYLINK
product sheet (886 kB).
|
