SYSTEM CABLE KIT
article number 3420

SYSTEM CABLE ensures reliable signal transmission within your Dataton rig. Signals are transmitted between Dataton control units through a bus system of high-quality cable and optically isolated electronic components inside the control units. The visible part of this system is SYSTEM CABLE. If you need specific nonstandard lengths of cable, use the SYSTEM CABLE KIT to make your own. Otherwise, Dataton SYSTEM CABLE is available in standard lengths of 0.4m, 1m, 2m and 5m (article numbers 3410, 3411, 3412, 3415).

For more information, download the SYSTEM CABLE KIT product sheet (223 kB).

AUXILIARY CABLE
article number 3450

AUXILIARY CABLE is used to make custom smartlinks. The cable has a 9 pin D-sub connector on one end and ready solder tinned bare ends on the other. The cable may also be used to connect auxiliary functions to the PAX control unit (now discontinued).

For more information, download the AUXILIARY CABLE product sheet (126 kB).

EXTENSION CABLE
article number 3451 (1m)
article number 3452 (2m)
article number 3455 (5m)

EXTENSION CABLE extends smartlink cables, projector adaptors or similar Dataton cables used with control units. EXTENSION CABLE plugs into the SMARTPAX QC or other Dataton control unit used.

For more information, download the EXTENSION CABLE product sheet (97 kB).