Overview
Product Info
Airlink Transmitter
Airlink Receiver
Keylink
Touchlink
Touchlink Accessories
Smartpax QC
Powerlink
Serial Smartlinks
Multiport Smartlinks
Cables
Power Supply and
Rackmount |
MULTIPORT SMARTLINKS
Smartlink cables are the hardware interface between SMARTPAX QC control
units and audiovisual devices in your rig. Each cable plugs into one of four ports on the
back of each SMARTPAX QC unit. The other end of the smartlink cable connects to the device
you want to control.
DIGITAL SMARTLINKTM
article number 3491
Interfaces SMARTPAX QC with power relays, solenoids, motors, small lamps
and more. It has 32 independent inputs and outputs each withstanding 300mA and 50V. The
input capability of this device is particularly useful for the triggering of tasks and
timelines in TRAX.
For more information, download the DIGITAL SMARTLINK product
datasheet (258 kB).
ANALOG SMARTLINKTM
article number 3492
The
ANALOG SMARTLINK is used to control analog devices, such as voltage controlled dimmers and
amplifiers. It outputs 32 independent 0-10V channels and has a 12 bit resolution, making
it suitable for particularly precise and demanding applications of fading or control.
For more information, download the ANALOG SMARTLINK product sheet
(135 kB).
AUDIO SMARTLINKTM
article number 3493
The AUDIO SMARTLINK is an audio mixer, letting you incorporate audio levels
in your multimedia rig. It has eight input/two outputs with two additional fixed inputs
allow multiple units to be cascaded for increased input capacity. The gain can be set or
faded independently for each of the eight inputs to any value in the range -100 dB to
+32dB plus mute. Each of the eight inputs have an overload LED indicator to avoid
distortion.
For more information, download the AUDIO SMARTLINK product sheet
(227 kB).
RELAY SMARTLINK
article number 3494
The RELAY SMARTLINK is used to control relay functions for audio equipment,
LEDs and lamps, voltage functions, such as AC/DC motors and power switching. This general
purpose interface has two independent single-pole double-throw relays, each capable of
switching up to 24 Volt DC/AC and 2 Ampere. It also features built-in optional arc
suppression varistors for use with inductive loads.
For more information, download the RELAY SMARTLINK product sheet
(123 kB). |
